Whirlpool Washing Machine – Don’t Wash or Spin
Washing machines are made by Whirlpool, Sears, Kenmore and Kitchen Aid, these newer machines called direct drive, the older machines used a belt and motor to the drive shaft. These machines use direct drive, a drive coupled to the control unit is connected to the coupling with the motor and the control unit is to break, the clutches sometimes. When this happens, the machine will take in water and drain, not as it affects the pump if the machine does not break the couplerWash and spin, because the engine is not connected to the control unit, at the end of the cycle, you will notice that the clothes are wet but not washed.
When the coupling breaks on this computer customers always think they need a new belt, they always have a strange look on her face when I tell them that this machine does not use a belt. All other brand machines even with a belt, here are some names that are belt driven for their washing machines, General Electric, Maytag,Westinghouse, Frigidaire, Speed Queen, Magic Chef and Amana.
When the washing machine washes at the beginning of the cycle, then stops with the water in them and will not flow, this problem can a defective lid switch or a defective timer. When the timer is broken chances are it will be in one of the cycles, if there are three cycles, push light, permanent or regular basis, usually it can be in the regular cycle, it does not work because the regular cycle is used more thanthe other two cycles. If the problem in the lid will not switch on the Life Cycle, it is to spin.
Related posts:
- Repairing Your Washing Machine Yourself
- Frigidaire Washing Machines – A Safe Choice For Washing
- Washing Machine Advice – How to Save Money With Your Washer
- What is the Best Washing Machine to Buy?
- Bosch Nexxt Washing Machines Overview
